Linux Mandrake 9.1 не работает Bluetooth 0

Есть Bluetooth донгл microlink mbt 1203 на чипсете Broadcom BCM2035.Он позволяет\может находить, при нажатии на нём кнопки, Bluetooth клаву и мышку.

Система P2 350/128ram/chipset i440bx Linux Mandrake 9.1 (kernel 2.4.21).Установил Bluez-libs,bluez-utils,bluez firmware,openobex.

Подключаю

Dmesg :

~

hub.c: new USB device 00:07.2-1, assigned address 2

hub.c: USB hub found

hub.c: 3 ports detected

hub.c: new USB device 00:07.2-1.1, assigned address 3

usb.c: USB device 3 (vend/prod 0xa5c/0×2009) is not claimed by any active driver.

hub.c: new USB device 00:07.2-1.2, assigned address 4

usb.c: USB device 4 (vend/prod 0xa5c/0×3502) is not claimed by any active driver.

hub.c: new USB device 00:07.2-1.3, assigned address 5

usb.c: USB device 5 (vend/prod 0xa5c/0×3503) is not claimed by any active driver.

BlueZ Core ver 2.2 Copyright (C) 2000,2001 Qualcomm Inc

Written 2000,2001 by Maxim Krasnyansky

BlueZ HCI USB driver ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc

Written 2000,2001 by Maxim Krasnyansky

usb.c: registered new driver hci_usb

usb.c: registered new driver keyboard

input0: USB HIDBP Keyboard 0a5c:3502 on usb1:4.0

usbkbd.c: :USB HID Boot Protocol keyboard driver

usb.c: registered new driver hiddev

usb.c: registered new driver hid

input1: USB HID v1.11 Mouse [0a5c:3503] on usb1:5.0

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik

hid-core.c: USB HID support drivers

mice: PS/2 mouse device common for all mice

usb.c: registered new driver usb_mouse

usbmouse.c: v1.6:USB HID Boot Protocol mouse driverm Corporation (15)

———————————————--

[root@griffin ]# hciconfig hci0 up

Can’t set scan mode on hci0. Device or resource busy(16)

[root@griffin ]# hciconfig -a

hci0: Type: USB

BD Address: 00:0C:55:FA:3D:CF ACL MTU: 377:10 SCO MTU: 16:0

UP RUNNING

RX bytes:63 acl:0 sco:0 events:7 errors:0

TX bytes:27 acl:0 sco:0 commands:7 errors:0

Features: 0xff 0xff 0×0d 0×38 0×08 0×08 0×00 0×00

Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3

Link policy:

Link mode: SLAVE ACCEPT

Can’t read local name on hci0. Input/output error(5)

[root@griffin ]# hciconfig hci0 version

hci0: Type: USB

BD Address: 00:0C:55:FA:3D:CF ACL MTU: 377:10 SCO MTU: 16:0

HCI Ver: 1.2 (0×2) HCI Rev: 0×69 LMP Ver: 1.2 (0×2) LMP Subver: 0×694a

Manufacturer: Broadcom Corporation (15)

—————————————————--

[root@griffin ]# hcitool scan

Scanning …

Inquiry failed: Connection timed out

—————————————————--

[root@griffin ]# lsmod

Module Size Used by Not tainted

usbmouse 2936 0 (unused)

keybdev 2720 0 (unused)

mousedev 5268 0 (unused)

hid 20900 0 (unused)

usbkbd 4440 0 (unused)

hci_usb 8632 1

input 5664 0 [usbmouse keybdev mousedev hid usbkbd]

bluez 38020 1 [hci_usb]

isofs 27988 1 (autoclean)

zlib_inflate 21156 0 (autoclean) [isofs]

udf 90464 0 (autoclean)

r128 83576 15

agpgart 40896 3 (autoclean)

es1371 29000 3

soundcore 6276 0 [es1371]

ac97_codec 12488 0 [es1371]

gameport 3316 0 [es1371]

nfsd 74256 8 (autoclean)

af_packet 14952 0 (autoclean)

sr_mod 16920 2 (autoclean)

floppy 55132 0

eepro100 21844 1 (autoclean)

mii 3832 0 (autoclean) [eepro100]

nls_iso8859-1 3516 2 (autoclean)

nls_cp850 4316 1 (autoclean)

vfat 11820 1 (autoclean)

fat 37944 0 (autoclean) [vfat]

supermount 15296 3 (autoclean)

ide-cd 33856 0

cdrom 31648 0 [sr_mod ide-cd]

—————————————————--

[root@griffin ]# lsusb

Invalid product/subclass spec at line 2650

Bus 001 Device 001: ID 0000:0000

Bus 001 Device 002: ID 0a5c:3535 Broadcom Corp.

Bus 001 Device 003: ID 0a5c:2009 Broadcom Corp.

Bus 001 Device 004: ID 0a5c:3502 Broadcom Corp.

Bus 001 Device 005: ID 0a5c:3503 Broadcom Corp.

————————————————-

Пытался modprobe — r hid,usbmouse,usbkbd -все без изменений !

!!! притом !!! этот же телефон с этим же «зубом» на другом компе с WinXP ПРЕКРАСНО работает

HELP !!